Description:

Concrete Mold Release Oil.

Aplications:

• MOLDOL 402 S is a light viscosity, bright and clear, non-staining concrete form release agent. The chemistry of MOLDOL 402 S reacts with the alkali of the concrete to form a film that allows easy separation from the forms. Clean, smooth finishes on concrete and very minimal build-up on the forms is the result.

• MOLDOL 402 S is generally applied through automatic spray systems in order to assure a consistent film. However, manual spraying, swabbing, or brush application may be acceptable. Coverage rate is approximately 500-2000 ft2 per gallon depending on the application equipment. A very light coat is sufficient and pooling of the fluid should be avoided.

• MOLDOL 402 S does not interfere with the adhesion of caulk, coatings, paint, sealers, and curing compounds on cured concrete surfaces when properly applied.  

Advantages:

• Ensures good lubricant film.

• Promotes good surface finish.

• Mild odor.

• Excellent metal wetting ability.

• Displaces water.

• Prevents build-up on forms.

• Non-staining.