Description:

Soft, Non-Melt, High Temperature Grease.

Applications:

• CALORIS MS is a soft, non-melt, clay thickened grease compounded with extreme pressure (EP) and anti-wear additives. These additives coupled with the high viscosity base oils, produce a high load carrying ability and reduce friction and wear. It contains molybdenum disulfide (moly) which is unaffected by temperatures up to 900o F.
• CALORIS MS is recommended for medium to slow speed bearings operating at normal temperatures and for medium to high speed bearings operating at elevated temperatures. CAUTION: Although this grease has no true dropping point, it may be used in applications up to 350 o F or higher. Prolonged exposure to very high temperatures accelerates oxidation and decreases service life. Hence, for applications above 350o F, frequent re-lubrication is recommended.
• Uses include: kiln car wheel bearings, trunnion bearings, oven door hinges, pellet mill bearings, slag bed shaker bearings, hot conveyor bearings, and steam control valves.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Advantages:

• Good water washout resistance.
• Non-melt.
• Excellent anti-rust, anti-corrosion, anti-oxidation properties.
• Contains moly to reduce friction and wear.
• High inorganic thickener content and heavy base oil viscosity improves sealing ability if used as a pipe thread compound.